Naraku Variator 115mm Maxi Speed (GY6)
Description: The ultimate variator SET for your GY6 transmission! The Naraku Maxi Speed Variator Kit includes a variator, variator plate, slides, machined drive face, and a set of 18x14 weights in 10.3 grams.
NOTE: Recommend using a new belt with this kit. Belt and the belt drive facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Includes the following Roller weights, Variator drive face, Variator housing, Variator slides, and Variator top.
• 1x Alumin-Alloy Housing Gray Coated ID: 24mm / OD: 115mm / H: 36mm
• 1x Metal Top ID: 15mm / OD: 86.9mm / H: 22mm
• 6x Roller Weights: 18x14mm 10.3gm
• 3x Plastic Red Slides
• Made in Taiwan
• Fit Belt Size: 743, 835, 842
• Fit Boss ID: 15mm / OD: 24mm
• Fit Dowel Pin Set (8x14mm)
• Fit 54mm Stud Spacing (A-Block)
• Fit 57mm Stud Spacing (B-Block)
• Fit GY6 125/150cc+
Supported Models: NCY CVT KIT (Part# 1200-1048-1); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Ruckus, Vento
Item Weight & Product Dimensions:
• 1.5 pounds | 4.528" (L) x 4.528" (W) x 1.496" (H)