Main Menu
Your Cart

NCY Variator Ramp Top (Aprilia, JOG, Zuma 50)

NCY Variator Ramp Top (Aprilia, JOG, Zuma 50)
NCY Variator Ramp Top (Aprilia, JOG, Zuma 50)
NCY Variator Ramp Top (Aprilia, JOG, Zuma 50)
NCY Variator Ramp Top (Aprilia, JOG, Zuma 50)

Description: NCY Variator Ramp Top aka variator pressure plate for your Aprilia, JOG, Zuma CW50, and Zuma 50F. NCY Variator Housing (Sold Separately, Part# 1200-1040).

May also, compatible with most variator housing on the market works on Yamaha Zuma, Minarelli Jog engines, Chinese Yamaha Clones such as the 1PE40QMB 1E40QMB engines, Malaguti, CPI, as well as Aprilia Scooters with Piaggio engines, and Franco-Morini 50cc engines found in the 1E41QMB Suzuki AD50 AG50, TGB R50X, TGB 101, TGB 303 and Peirspeed Scooters.

NOTE: Recommend using a new belt with this kit. Belt and the belt drive facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.

Specifications:

Include the following Variator top.

•    1x Metal Top ID: 12.5mm / OD: 75mm / H: 11.58mm
•    Made in Taiwan
•    Fit Housing ID: 17.87mm / OD: 94.81mm / H: 26.67mm
•    Fit 6x Roller Weights: 
15x12mm
•    Fit 3x Plastic Slides
•    Fit Dowel Pin Set (8x14mm)
•    Fit Belt Size: 818 (Fit Aprilia ONLY)
•    Fit Belt Size: 788 (Fit JOG ONLY)
•    Fit Belt Size: 784.5 (Fit Zuma 50 ONLY)
•    Fit Compression Spring: 1k1.5k2k rpm
•    Fit Dowel Pin Set (8x14mm)
•    Fit Aprilia 50
•    
Fit Jog 50
•    Fit Zuma 50

Supported Models: NCY CVT KIT (Part# 1200-1197); Yamaha C3, Yamaha Zuma CW50, Yamaha Zuma 50F, Yamaha Vino Minarelli Jog engines, Chinese Yamaha Clones 1PE40QMB 1E40QMB engines, Malaguti, CPI, Aprilia Scooters with Piaggio engines, and Franco-Morini 50cc engines found in the 1E41QMB Suzuki AD50 AG50, TGB R50X, TGB 101, TGB 303, and Peirspeed Scooters.

-----
Item Weight & Product Dimensions:
•    0.176 pounds | 2.952" (OD) x 0.492" (ID) x 0.456" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
NCY Variator Ramp Top (Aprilia, JOG, Zuma 50)
  • Stock: 40
  • Part #: 1200-1039
Sold: 0
Views: 130
$12.95
Price in reward points: 13

Included